HPF-850HP split tube furnace

Designed for using at 88 PSI ( 6 atm) high pressure up to 850oC under oxidizing and inert gas atmosphere to process special... Specifications:

Furnace casing		Double layer steel casing with air cooling. Built in thermostat to control Cooling  running automatically when case > 55oC
Power	KW	2.5
Voltage	V	AC 208-240 Single Phase, 50/60 Hz
Max. Temperature	oC	800
Max. Heating Rate	oC /min	<= 30
Material and Size of Pressure Vessel	mm	Stainless Steel (SS304 body / SS316 Cap, Made in USA) 2-1/2" O.D x 1-1/2" I.D. x 40"  Length
Heating Zone length	mm	440 ( single zone )
Constant  temperature	mm	150  (+/-1oC) ,   200  (+/-1oC)
Temperature controller		PID automatic control with 30 segments programmableLED digital display with protection Over temperature and thermal couple broken
Temperature Accuracy	oC	+/ - 1
Pressure Fitting		Two stainless steel  ( SS316)  flanges weld to tube with double high temperature silicone O-ring ( 300oC Max. ) Two Aluminum heat radiators are installed in front of flange to keep flange below 100oC Two high pressure valves are installed with flanges One Pressure meter installed to one of valve One pressure safety valve  (100 PSI)  is installed in one end of tube
Working Pressure vs temperature	PSI	Warning:  Must limit Workign temperature under a certain pressure limited by vessel material strength 1800 PSI max    at 600 oC   (124 bar ) 750 PSI max      at 650oC   (51 bar) 450 PSI max.      at 700oC   (31 bar) 150 PSI max.      at 800 oC   (10 bar )Never use pressure vessel above 800oC
Heating Element		Fe-Cr-Al Alloy doped by Mo
Dimension	mm	550 x 380 x 520
Net Weight	Kg	about 40
Warranty		One year
Shipping package size  after crating	inch	45x45x35
Shipping weight	lbs	200
Warranty		one year limited on all electronic parts, not including quartz tube
Cautions		From 7/15/08, MTI calibrate each each furnace by , and pre-set temperature off ( SC value ) in controller before shipping.

HPF-850HP split tube furnace